• Image 0

    Get the inside story
    on Zeta-pdm's
    separation technology

    Read more
  • Image 1


    Separation solutions
    built to last a lifetime

    Read more
  • Image 2

    With a no failure record,
    Zeta-pdm's technology
    speaks for itself

    Read more
  • Image 3

    Our 'whole lifecycle'
    approach is trusted by
    leading global players

    Read more

The ZP-310 Vane Type Demisting Device offered by Zeta-pdm Ltd is designed primarily for use in vertical separators and scrubbers and consists of high efficiency double “pocket" or "trough" type vanes, where the agglomerated sheet of liquid flows into the vertical vane troughs. These vanes extend over the complete width of the vane pack and are arranged to oppose the vertical gas flow.

The "trough" is shielded to partition the falling liquids (inside the drainage chambers) from the main gas stream flowing (outside) within the vane blades, thus minimising any re-entrainment of the separated fluids.

After running into the liquid collector, the liquids are drained into the bulk liquid within the separator, returning to a level below the lowest liquid level, i.e. below the Low Low Liquid Level (LLLL), via a liquid "downcomer" system.

The ZP-310 Vane Type Demisting Device can be mounted in an up-flow or down-flow configuration, even where strict space restrictions apply.

Advantages of the ZP-310 Vane Type Demisting Device

  • Offers a high gas / liquid separation efficiency at high operating pressures
  • Low re-entrainment.
  • Handles high throughput.
  • Handles high liquid loading.
  • Low pressure drop.
  • Robust construction.
  • Reduces the vessel size on a new build project.
  • Allows a greater fluid throughput for a set vessel size, on a revamp project.
  • Easy to install in new and existing separators
  • No moving parts, so no maintenance.

Applications of the ZP-310 Vane Type Demisting Device

  • Production Separators
  • Test Separators.
  • Gas Scrubbers.
  • Gas Knock-out Drums.
  • Slug Catchers
  • Flash Drums
  • Process Vessels and Columns.
  • Floating Production Units (FPUs).

Case Studies

Inlet Cyclones Flow Assurance

Inlet cyclones are designed to handle fluids with both high inlet momentum and a significant liquid content. Their separation characteristics are exceptional with 99% or better separation of gas from liquid.

Read more ...
EIC Fpal Fpal Achilles Zeta-pdm Ltd are ISO 9001, 14001 and 18001 certified